BCX260 - for 260cm / 102inch working width, for 5 feet high grass and branch, for 90 - 150HP tractor.

Heavy duty flail mower with hydraulic side-shift for larger tractors with 90hp to 150hp engines with CAT II / CAT III 3-point hitches for front and rear side mounting.

Free PTO shaft included.

Technology:

Double housing. For wide and heavy fail mowers, using very high RPM on the rotor shaft, a torsion-resistant and low vibration housing is the precondition for a reliable machine. Next to massive side walls, which are 10mm thick on the Twins Industry BCX-series, best results are achieved when using double walled housings. The Twins Industry BCX-mower comes with double housing design. This leads to a very smooth operation of this professional implement.

20 inches offset capacity. Twins Industry BCX mower is with 20 inches offset capacity.

Floating hitch design. Twins Industry BCX mower is with floating hitch design, protect the mower when mowing on uneven ground. It can be mounted on tractor's both front and rear.

New 3 LBS forged flail hammer.  Twins Industry BCX is with forged and galvanized high performance hammer knives, each weight is 1100gram / 2.5lbs.

Replaceable counter knife. The new replaceable counter knife, integrated in the mower housing, are helping to do an even more efficient job as before.

Heavy duty roller. The mowing height is adjusted by the heavy, ball-bearing mounted self cleaning rear roller, to prevent the mower from cutting into the ground on bumpy surface.

Heavy duty front flaps. The mower's front is equipped with heavy duty safety flaps to prevent debris and stones being thrown out of the machine.

Solid wooden packing box. The mower is delivered in the massive Twins Industry wooden boxes.

5 belts Driven system. Like all other Twins Industry mowers, the BCX series has an electronically balanced rotor shaft which is driven by 5 belts depending on the working width. Despite the high flail hammer knife weight of 2.5lbs, this guarantees an almost 100% power transfer rate with virtually 0% belt slippage.

Electronically balanced rotor. All the Twins Industry mowers has an electronically balanced knife shaft which is driven by 3 or 4 wide belts. The heavy free-wheel gear box runs in an oil bath, so the transmission oil has to be filled up before you first use the machine.

We from Twins Industry firmly believe that you will not find a better value for money mid size flail mower in the US market. Feel free to compare ours to the other products in the market and we are sure you will agree.

Partially assembled machines do not contain any fuel, oil or other fluids or grease needed for operation ! BEFORE USING THE MACHINE please carefully read the English user manual.

Check mower's 3 point hitch size from here.

Check mower's position on your tractor according to this size list.