BCRI-series - for working widths from 180cm/70inch to 220cm/86inch. 

Free PTO shaft included.

Ditch mower for medium and big tractors with 50hp to 90hp with CAT II. 3-point hitch.

Twins Industry BCRI heavy duty ditch mower with 1100gr/2.5lbs flail hammers, for medium and big tractors from 40hp to 90hp engines with Cat. II 3-point hitches, working width is from 180cm/70inch to 220cm/86inch, 154cm/60inch hydraulic side-shift capacity, mowing range angle from -60° to +90°, the maximum distance from the middle of the tractor to the right side of the mower is up to 142inch/360cm , depending on the BCRI-model.

The hydraulic swivel arm not only allows mowing in almost any position, but it also saves manoeuvring in narrow corners when you use the BCRI as regular flail mower. Your tractor needs 2 double acting hydraulic control circuits in order to fully operate the swivel arm.

Technology:

Comer Transmission. Twins Industry BCRI heavy duty ditch mower use transmission from Comer Industries.

Reinforced 3 point hitch. Twins Industry BCRI is with reinforced 3 point hitch.

Forged flail hammer. Twins Industry BCRI is with forged and galvanized high performance hammer knives, each weight is 1100gr/2.5lbs.

Mechanical crash protection system: The Twins Industry BCRI series offers a crash protection system, which lets the mower swing out to the back, in case you hit a solid piece of material. This additional swinging feature gives the tractor driver the opportunity to brake in time, before serious damage is done to the mower. This safety feature is totally maintenance free and runs reliably for years.

Safety protection valve. Twins Industry BCRI has 2 safety valve to prevent tractor falling accident due to mower falling too fast. When transport the BCRI mower, Twins Industry provide 2 locking pin to keep mower in safe transport position.

Replaceable counter knife . The counter knife in the mower housing and replaceable, are helping to do an even more efficient job as before.

Heavy duty roller. The mowing height is adjusted by the heavy, ball-bearing mounted self cleaning rear roller which is 7.6inch diameter, to prevent the mower from cutting into the ground on bumpy surface.

Heavy duty front flaps. The mower's front is equipped with heavy duty safety flaps to prevent debris and stones being thrown out of the machine.

Strong V belt. The BCRI series has an electronically balanced rotor shaft which is driven by 4 belts depending on the working width. Despite the high flail hammer knife weight of 1100gr/2.5lbs, this guarantees an almost 100% power transfer rate with virtually 0% belt slippage. The new Twins Industry belt cover is unique in the BCRI mower class. The correct belt tension can be checked within seconds without having to remove the belt cover. This makes service and maintenance a lot easier than before.

Electronically balanced rotor. Like all other Twins Industry mowers, the BCRI series has an electronically balanced knife shaft which is driven by 4 wide belts. The heavy free-wheel gear box runs in an oil bath, so the transmission oil has to be filled up before you first use the machine.

We from Twins Industry Tractor firmly believe that you will not find a better value for money mid size flail mower in the US market. Feel free to compare ours to the other products in the market and we are sure you will agree.

ATTENTION:

BCRI ditch bank mower has two cylinders, so it needs two loops tractor rear hydraulics.

Partially assembled machines do not contain any fuel, oil or other fluids or grease needed for operation ! BEFORE USING THE MACHINE please carefully read the English user manual.

Liftgate for delivery is not available because the BCRI packing crate is too big.

Check mower's 3 point hitch size from here.

Check mower's position on your tractor according to this size list.

Check mower's position on your tractor according to this size list.