Flail Mower
- Model: ATV
Description
ATV Pull Behind Flail Mower - 429cc 14HP Kohler Command PRO engine - 0.7LBS(320gram) forging hammer - 120/150cm & 45/57inch working width - up to 40cm/15inch grass height
Flail mower, ATV mower with 4-stroke Kohler 14HP engine for car trailer hook - powerful flail mower without PTO shaft !
Application:Twins Industry ATV mower is a powerful flail mower that is driven by Kohler Command PRO 14HP engine, it is with standard 5cm/2inch towball which can be mounted on your car, Pickup, lawn mower, Quad/ATV/UTV. For easy operation there is an emergency breakaway cut off switch and a ATV mount throttle adjustment control.
Technology:
Kohler Command PRO 14HP engine Twins Industry ATV mower is driven by Kohler Command PRO 14HP electric start engine.
Forged flail hammer. Twins Industry ATV mower is with 28 or 32 units forged and galvanized high performance hammer knives, each weight is 320gram / 0.7LBS. The rotor shaft turns with up to 3200 rpm and cuts the material down to a minimum, so that it can rot away fast. The Twins Industry ATV-flail mower is the ideal machine for mowing fields of any kind, but it can also be used for undergrowth, small bushes and jobs in difficult terrain. The heavy roller in the back of the mower guarantees smooth performance even on rough grounds. Due to the large and wide tires, the Twins Industry ATV-flail mower can also be used on soft surface.
Two belt driven system. The introduction of the Twins Industry two-belt-drive system with a high precision clutch leads to a drive system that has virtually 100% power transfer rate with virtually 0% belt slippage over years. Belt slippage on belt systems is a major issue leading to belt failure. The Bowell belt tension system eradicates this which not only saves money and downtime, but also means that our new powerful engine can be fitted, again without belt slippage. It is no longer needed to open the belt cover to check the belt tension. There is a small test window where you can check the belt tension and condition in seconds. The belt tension is done by lifting the entire engine platform by a well accessible mechanism, again without having to open the belt cover.
Two mowing width available. Twins Industry ATV mower is with two mowing width which is 45inch / 115cm and 57inch / 145cm.
Flexible wheel setup. The mowing height can be adjusted from 3/4 inch to 2 3/4 inch (20 - 70mm). The draw bar is fully adjustable and has a 3 point offset function to minimize ground tramping. The extremely variable offset function also enables you to drive more closely to walls and fences and you can easily mow under bushes or solar panels. In driving direction to the right the Twins Industry ATV flail mower offers 55inch / 140cm (ATV-120) or 68inch / 175cm (ATV-150) offset from the middle of the towing vehicle. In driving direction to the left ATV flail mower offers 68inch / 175cm (ATV-120) or 80inch / 205cm (ATV-150) offset from the middle of the towing vehicle. These are offset values that are normally only reached by tractors and their hydraulic side shift mowers.
The ATV-flail mower is normally used with the wheels mounted to each side, so that even smaller ATVs can easily pull the 491LBS / 580LBS flail mower savely through rough terrain. For special applications like mowing near fences, walls or buildings the wheels can also be mounted on the rear of the mower using the supplied rear wheel mount bracket.
Rear gate for easy maintenance. Twins Industry ATV mower is with rear gate, you can open it easily to check the hammer and rotor condition for maintenance.
SKF rotor bearing . Twins Industry ATV mower is with SKF brand rotor bearing.
We from Twins Industry firmly believe that you will not find a better value for money mid size ATV flail mower in the US market. Feel free to compare ours to the other products in the market and we are sure you will agree.
ATTENTION:
Partially assembled machines do not contain any fuel, oil or other fluids or grease needed for operation ! BEFORE USING THE MACHINE please carefully read the English user manual.
| Technical Data |
ATV120
|
ATV150
|
|
Dimensions (LxWxH)inch wheels on the side or on the rear |
200x165x92/200x152x92cm 79x64x36/79x60x36inch |
200x195x92/200x175x92cm 79x76x36/79x68x36inch |
| Total weight |
222kg / 491LBS
|
263kg / 580LBS
|
| working width |
115cm / 45inch
|
145cm / 57inch
|
| recommended grass height |
40cm / 15inch
|
|
| adjustable mowing height |
20-70mm / 0.75-2.75inch
|
|
| tire size |
16" x 6.5" – 8"
|
|
| trailer connector |
5cm / 2inch Towball
|
|
| working efficiency |
2000-2500 m2/h 0.5 - 0.6 acre/h |
2500-3000m2/h 0.6 - 0.75 acre/h |
| drive system |
2 belt driven system
|
|
| engine |
Kohler Command PRO 14HP electric start engine
|
|
| starter |
electric start, battery included
|
|
| fuel tank |
5L / 1.5gal
|
|
| rotor shaft diameter / material strength |
108x8mm 43x3.2inch |
|
| rear roller diameter / material strength |
102x4mm 40x2inch |
|
| material strength mower housing |
4mm / 0.16inch
|
|
| material strength side walls |
6mm / 0.25inch
|
|
| painting |
powder coating
|
|
| flail type |
flail hammer, forged and galvanized
|
|
| number of flails |
28
|
32
|
| weight per flail hammer |
320gram / 0.7LBS
|
|
| rotor RPM when engine at full speed |
3200 RPM
|
|
| wood packing box size (L x W x H) |
190x105x110cm 75x41x43 inch |
220x105x110cm 87x41x43 inch |
Check mower's position on your ATV according to this size list.

D: max ground clearance in transport mode
E: wheel in side position
F: wheel in rear position