Excavator Implement / Skid Steer Implement

Hydraulic stump grinder for Mini Excavator with MS-01, MS-03, CW-05, CW-10 Interface

Product description

Twin-industry root grinder with hydraulic drive for mounting on any type of mini excavator via interchangeable mounting plates. 

A stump grinder, also known as a root grinder, is used to remove tree stumps and roots after a tree has been felled. The main purpose of the stump grinder is to remove or grind the tree stump to a certain depth in the ground in order to create a level surface, e.g. for new plantings or paving work.

The root grinder has a rotating milling disc with special milling teeth that is moved back and forth across the tree stump, removing several centimetres of wood with each pass. The teeth, which are tipped with tungsten carbide, cut the wood into small pieces and shred it into mulch or sawdust. The milling disc moves from side to side and from top to bottom to work evenly on the entire stump. Depending on the size and hardness of the tree stump, this process can take from a few minutes to several hours.

The advantage of using a stump grinder is that it is efficient and time-saving. It allows tree stumps to be removed quickly without the need for manual digging or excavating the roots.

This model is suitable for most excavators between 2 and 5 tonnes and offers maximum freedom of movement thanks to its hydraulic drive. Bowell's hydraulically driven root grinders can be mounted on different excavator attachments, allowing them to work in hard-to-reach places with the appropriate reach. This could be on a slope or close to a fence or wall where larger machines cannot be used.

 

	WF-01	WF-03
adapter plate	MS-01	MS-03
knives	16	16
rotor diameter  mm (E)	435	435
weight  kg	160	175
dimensions
A  mm	1242	1442
B  mm	460	480
C  mm	630	650
D  mm	410	435
required oil flow  L/Min	33	40
required oil pressure  bar	120 - 140	140 - 160