Flail Mower

Middle duty flail mower with 1,2kg flail hammers for small and medium sized tractors from 35 hp to 75 hp with CAT I / II 3-point hitch

Application

The Twin-industry EFGCpro flail mower series offers you professional technology for small and medium-sized tractors and is equipped with reinforced free-wheel angle gears from the Italian manufacturer Comer. With a working width of up to 220 cm, the solid EFGCpro mowers can be optimally adapted to the power and width of your tractor and the area to be cultivated.

Twin-industry EFGCpro flail mowers are equipped with Twin-industry Power Efficiency technology ex works. If your tractor supports a PTO speed of 1000 rpm in addition to the normal 540 rpm, you can also use the Bowell EFGCpro mowers at this increased speed. Simply replace the upper pulley with the lower pulley of the belt drive and you can achieve the same work performance much more efficiently and with lower fuel consumption. Save fuel with the new Bowell Power Efficiency technology, at no extra cost, right from the very first metre.

EFGCpro mowers can be used effectively on medium-sized areas with grass heights of up to 100 cm that only need to be mowed two or three times a year.

Technology

high-performance flails:Depending on the working width, EFGCpro flail mowers are equipped with 14 to 20 of the heavy, hardened, approx. 1.2 kg new Twin-industry high-performance flails. The newly developed, replaceable counter blades inside the flail mowers ensure optimum results even with stubborn undergrowth and bushes.

The heavy, ball-bearing, self-cleaning rear roller is used to set the cutting height between 20 and 75 mm. The height-adjustable side skids on the flail mower prevent the mower from cutting into the ground when encountering bumps. A support at the front ensures stability when storing the equipment.

 reinforced Comer freewheel gearbox:The reinforced Comer freewheel gearbox on the mower ensures that the heavy flail shaft can continue to run after the PTO drive is switched off without the movement being transferred to the tractor. The metal slats attached to the front of the flail mower prevent stones and other foreign objects from flying around.

SKF ball bearings

Underneath the 5mm to 8mm thick housing of the mowers sits a laser-balanced rotor shaft with 14 to 20 hardened high-performance flails, each weighing approx. 1.2 kg. The flails have bevelled surfaces on the inside, to which deposits can hardly adhere. A further improved, spiral arrangement of the flails on the rotor shaft guarantees maximum performance with minimum effort for the tractor. The mowers of the EFGCpro series are equipped with reinforced rotor shafts that have a diameter of 127 mm and a wall thickness of 10 mm. The larger diameter also increases the flail speed and thus their performance.

The new Bowell EFGCpro mowers are equipped with SKF ball bearings, which are protected from external influences in solid, CNC-milled bearing seats. The stainless steel grease nipples are easily accessible on the outside of the mulcher housing and protected against contamination and damage by additional metal rings.

The rotor shaft of the mowers rotates, driven by the tractor's PTO shaft at up to 2200 rpm, and shreds the cut material to a minimum so that it can rot quickly. The heavy, ball-bearing trailing roller guarantees smooth running.

Tags: EFGCpro Professional Middle Duty Flail Mower